Sliced noodles machine structure and function
This machine is mainly a reducer, screw propeller, and cam surface before and after feeding plate composition, has the advantages of small size, compact structure, convenient operation, high efficiency, convenient disassembly and maintenance. The flour (mix synthetic fabric) through a side wheel propeller to send in the face before and after, and the cam surface under the action of centrifugal force, fabric is two disc extruded by surface cutting into the middle of thick and thin noodles on both sides of the fly.
Sliced noodles machine use method and the matters needing attention
1. Before starting the machine, check whether the screw bolt is loose and whether the motor shell is grounded.
2, starting the motor for 5 minutes, it can be produced after no error.
3, noodles: noodles noodles machine or handmade noodles, evenly. Attention should not be too soft or too hard, suitable.
4, the top end of the parting device should be right to the cutting tool.
5. Tighten the double nuts at the outer end of the panel.
6, feeding: mix the good fabric cutting up the bar, and then to the noodles machine feeding bucket surface caving face, do not break, cut out the noodles fly at abroad.
